Radio-tone RT-RoIP2 User's Guide download pdf (Page 6)

RT-RoIP2 User’s Guide

Installation

Simple System Connection Diagrams

Note: The connected Radio Unit MUST be used external antenna to reduce the TX RF

signal affect to the system equipment.

 Connect the Radio Unit to an external antenna.

 Connect the RT-RoIP2 to a Radio Unit by using the bundled connection cable.

 Connect the RT-RoIP2 to an IP network by using the Ethernet cable.

 Turn on the Radio Unit and adjust its volume to approximate 1/3 position of maximum level.

 Adjust the radio frequency and CTCSS on both Radio Unit and all other handhelds/mobiles.

 Connect the RT-RoIP2 to power outlet by using the AC adapter to turn on the RT-RoIP2.

Setup PTT Control Mode of RT-RoIP2

The RT-RoIP2 ships with PTT Control Mode 1. For some radio units, like KG-UVD1P, they are required the PTT

Control Mode 2 to let them work as Transmitter. Please set the PTT Mode switch to ON position to change PTT

Control Mode to Mode 2.

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Radio-tone RT-RoIP2 User's Guide Page 6